cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

2464
Views
0
Helpful
5
Replies
Highlighted
Beginner

SPA2102 firmware 5.2.13 update error

The firmware update upg-spa2102-5-2-13.exe doesn't work.

Error: Run-Time Check Failure #2 - Stack around the variable 'strNc' was corrupted.

Solution:

You have to remove (blank) the admin and user password before starting the update. Put them back after.

Only firmware 5.2.13 is affected.

Everyone's tags (1)
5 REPLIES 5
Highlighted

SPA2102 firmware 5.2.13 update error

Same here

Windows XP

SPA2102

Software Version:5.2.12

Beginner

SPA2102 firmware 5.2.13 update error

I'm getting the exact same error here, too.

Windows 7

SPA2102

Trying to upgrade from Version 5.2.12 to 5.2.13

Highlighted
Beginner

SPA2102 firmware 5.2.13 update error

Hi, where you able to apply the update to latest firmware? I go the exam same problem (C++ error blablabla... )

Highlighted
Rising star

SPA2102 firmware 5.2.13 update error

You can try a provisioning update method.

Enable a web server or tftp server on your PC (e.g. 3C Daemon), put the firmware file in the server directory and use one of these urls in your browser:

http://SPA_IP_ADDRESS/admin/upgrade?http://YOUR_WEB_SERVER_IP/SPA_FIRWARE.bin

or

http://SPA_IP_ADDRESS/admin/upgrade?tftp://YOUR_TFTP_SERVER_IP/SPA_FIRWARE.bin

Regards.

Highlighted
Beginner

SPA2102 firmware 5.2.13 update error

Solution:

You have to remove (blank) the admin and user password before starting the update. Put them back after.

Only firmware 5.2.13 is affected.