SPA232D firmware update

[kelber.stefan]

Hello,

My SPA203D currently is on firmware 1.2.0. When I go onto the web gui firmwar eupdate site the "browse" button is greyed out. Clicking F5 for site refresh shows the button clickable for a brief moment but one has to be quick to click it. I select the file but then the "Upgrade" button is not clickable either. Is this a bug?

This is the file I am trying:  Firmware for SPA232D SPA302D, Version 1.3.2-014

[Patrick Born · Accepted solution]

Hi Stefan,

It could be that you're connected to the WAN port and have not authorized upgrades via the WAN port. Connect to the LAN port and try again.

It could be a browser issue, but I doubt it. Try with IE. I recall an issue with the SPA1xx on their early firmware where only IE was able to browse for a firmware file.

This document may help you: https://supportforums.cisco.com/docs/DOC-27890

Regards,

Patrick---

[kelber.stefan]

Thanks Patrick. Now, is there a ssh/telnet login available to edit the conf files?

[Patrick Born]

Stefan,

No ssh/telnet access is available on this device. The way to change the configuration is to either:

• use the web-user interface: http://ipAddressOfATA
• or have the ATA retrieve the configuration as part of provisioning. This is described in the provisioning guide linked from

https://supportforums.cisco.com/docs/DOC-28766

Regards,

Patrick---