cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

825
Views
0
Helpful
1
Replies
baduniswapan
Beginner

SPA232D Issues registering with Call Manager

Hi,

I have been having a lot of issues with the SPA232D. I am unable to get it to register to Call Manager.

 

Proxy server : Do I use my Call Manager TFTP Address or the PUB address?

I want to register the DECT phone that comes with the ATA and possibly also an analogue phone.

On what Menu (Voice) What Sub Menu do I enter the details below.

 

User ID: Extension Number

Authorization user: END user Username

Password: End User Password

I have already done the following.

Setting the SPA232D to "Bridge mode"

Can get a DHCP IP Address.

Add the device to CUCM as Advanced third party SIP device

Make a copy of the default SIP security profile in cucm and add the "digest authentication" feature to that profile

add the security profile to the phone in cucm

Add a user to CUCM (User id in cucm used as user on the dect phone)

set a digest password on the user in cucm (used as PIN in the dect)

associate the user to the phone

1 REPLY 1
Dan Miley
Participant

This config is not officially supported, but here's the instructions for cucm 7.1,

I believe there is another section in the admin guide for cucm8

 

Cisco Unified Communications Manager Administration Guide, Release 7.1(2) - Configuring Non-Cisco SIP Phones [Cisco Unified Communications Manager (CallManager)] - Cisco

 

Hope it helps,

Dan