SPA3102 - PSTN call not transfering to VoIP

[stalahacisco]

When I call my PSTN line, after the PSTN answer delay, I just hear dialtone. I have enabled debug and I do see an invite being sent to my SIP trunk.

Here is what I get in the debug:

01-10-2013 09:40:21 Local2.Debug 166.166.0.44 CC:Clean Up

01-10-2013 09:39:48 Local2.Debug 166.166.0.44 AUD:Stop PSTN Tone

01-10-2013 09:39:48 Local2.Debug 166.166.0.44 AUD:Stop PSTN Tone

01-10-2013 09:39:38 Local2.Debug 166.166.0.44 AUD:Play PSTN Tone 8

01-10-2013 09:39:28 Local2.Debug 166.166.0.44 AUD:Play PSTN Tone 1

01-10-2013 09:39:28 Local2.Debug 166.166.0.44 FXO:Stop CNDD

01-10-2013 09:39:28 Local2.Debug 166.166.0.44 AUD:Stop PSTN Tone

01-10-2013 09:39:20 Local2.Debug 166.166.0.44 FXO:Start CNDD

Any idea on what I might be missing?

Thanks

Scott

[Howard Wittenberg]

It is normal to get a dialtone when the PSTN-to-VoIP gateway answers the phone unless you have a dial plan setup to automatically dial a number.  A dial plan like (S0<:1234567890>) would set the interdigit timeout to 0 and dial 1234567890 on the configuration you have setup on the PSTN Line Tab.

[stalahacisco]

That worked!!!

Thanks