I'm new to using the SPA8000 but have substantial experience with the SPA112 2-port ATA. I am attempting to register and use each of L1 to L8 against our AVAYA Session Manger (ASM). I have no problem in registering each line against our ASM with each indicating they are registered (confirmed on the ASM). Note that I have turned off the SPA8000 trunks as I do not plan to use them.
I can choose any of L1 to L8 and make a call without issue.... but I cannot receive a call against any of L1 though L8. To simplify troubleshooting I disabled L2 to L8 and left L1 active for testing.
So if I call the extension associated with L1... it does not ring. When I capture the debug info I see the following; M0: SIP:MBUF OVFL 4360/2559 (repeats 16x)
Wireshark shows clearly that the call invite (from the ASM) to the SPA8000 appears on the network segment, but there is no response from the SPA8000.
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 184.108.40.206 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 220.127.116.11 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...