cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1041
Views
0
Helpful
1
Replies

SPA8000 VLAN ID

deepakitkar
Level 1
Level 1

I accidentally turned on the VLAN on SPA 8000 and now I cannot connect the box and all extensions on the box are dead. How do I turn off the VLAN?

1 Reply 1

You could recover your SPA connecting a "vlan capable switch" to the internet port of the SPA and configure the port of the switch as a trunk with the vlan configured for error.

e.g.

SWITCH PORT 1 - trunk port with vlan 10 -----> SPA8000

SWITCH PORT 2 - access port with vlan 10 ----> PC

If you don't know the vlan id or you have trouble in this procedure you must reset the SPA to factory default:

connect a phone to fxs 1

digit **** then

73738# then

1 to confirm

Regards.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: