10-27-2011 03:31 AM - edited 03-21-2019 09:39 AM
Hi Everyone,
I've recently been handed a cisco spa8800 to configure and I'm wondering if it is possible to use the device with a couple of spa941 IP telephones.
I'm aware that the spa8800 can interface with an asterisk box, though the requirement doesn't list one.
Is there anyway of achieving this?
Am happy to provide more details and bounce around ideas as needed.
Thanks,
Matt.
10-27-2011 09:36 AM
Hi matt,
Unfortunately the SPA8800 is not a Call Control, then if you wish to use the SPA941 you should use it with IP Dialing (option can be enabled after Dial Plan Field).
The SPA8800 can interface with asterisk without problems, we have in this community some guides to do this kind of configuration in SPA Phones, you can use the same guide and adapt to your needs.
https://supportforums.cisco.com/docs/DOC-9955
Please let me know if it answer your questions and if you need further information.
Thanks,
Regards
Andrey Cassemiro.
10-27-2011 09:39 AM
I'm sorry, there was an exactly doc.
01-27-2014 01:27 AM
I have spa 8800 which can configured the incoming but out going is not working.I think my dial plane is not corrected.how can i configure out going.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide