cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

1230
Views
0
Helpful
2
Replies
X-Nemesis
Beginner

Unable to upgrade SPA2102 with latest firmware

Here is my setup and what I've tried so far.

1. I have my ethernet from my cable modem going into the Yellow internet port on my Linksys E2000.

2. The SPA2102 connected from the Yellow Ethernet port on the SPA to ethernet port #2 on the E2000.

When I run the upgrade utility (firmware upg-spa2102-5-2-12) I get the following windows.

spa2102-1.JPG

and

spa2102-2.JPG

But the screen just hangs there and does not upgrade.

What am I missing?

2 REPLIES 2
D_Lebedev
Participant

Hi.

This device can be upgraded only from "Internet" port.

It's blue,as i know.

Try plug your pc/laptop directly to LAN/Ethernet port of the SPA-2102 and run the firmware upgrade executable file

If there is DHCP server on the SPA,so let it give address to your pc.

So,nothing else :-)

I managed to upgrade successfully