12-03-2011 02:41 AM - edited 03-21-2019 09:40 AM
Here is my setup and what I've tried so far.
1. I have my ethernet from my cable modem going into the Yellow internet port on my Linksys E2000.
2. The SPA2102 connected from the Yellow Ethernet port on the SPA to ethernet port #2 on the E2000.
When I run the upgrade utility (firmware upg-spa2102-5-2-12) I get the following windows.
and
But the screen just hangs there and does not upgrade.
What am I missing?
12-04-2011 11:22 PM
Hi.
This device can be upgraded only from "Internet" port.
It's blue,as i know.
Try plug your pc/laptop directly to LAN/Ethernet port of the SPA-2102 and run the firmware upgrade executable file
If there is DHCP server on the SPA,so let it give address to your pc.
So,nothing else :-)
12-04-2011 11:50 PM
I managed to upgrade successfully
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide