Automation and Analytics

Resolved! Prime API and clientDetails API

I'm having some issues trying to make a successful call to the below URL. I'm wanting to include the ipAddress parameter but each time I seem to get it wrong :S I'm using Cisco Prime Infrastructure with v4 API and the API documentation isn't super cl...

APIC-EM huge postgre data

Hi All i have a apic-em installation where the clients will not start, possible due to missing diskspacewhat can i do to clean up ? From grapevine GUI:Unable to find host with enough capacity. Rejecting grow request for service=access-policy-programm...

Resolved! Prime Infrastructure ReST API Calls

Hi,I have a query regarding the Cisco Prime Infrastructure API documentation hosted under URL: https://developer.cisco.com/site/prime-infrastructure/documents/api-reference/rest-api-v3-0/. I am using ReST apis mentioned in the above stated url to fet...

Multiple yang subfilters treated separately

Hello, I am automating a series of tests on IOS-XR devices using Netconf/Yang. As part of this, I'm currently working on a particular test involving some LDP checks. I want to get some MPLS information for a protected path in the forwarding table for...

Resolved! Apply EasyQoS to Single Device

I'm running APIC-EM version 1.5.1.1054. Is there a way to apply EasyQoS policy to a single device in a scope?Thank you,Brian

IOS-XE Dial out reconnection time

Hello, I am starting to look into telemetry streaming using dialout to pipeline from IOS XE 16.10 (CBR platform). The biggest problem I am having now is that if i restart pipeline, the session from the CBR does not reconnect. I only have a single pip...

YDK with openconfig-interfaces issue with NCS5k

Hi all, Fairly new to YDK and openconfig Yang models. Trying out some basic testing as below, just want to create a loopback interface on an NCS540 and getting a corruption and abort error. Any ideas on what may be causing this? Type "help", "copyrig...

IOS XE ASR1001-X Ansible/Netconf identityref error

Hello, I have an ASR1001-X running XE 16.9.4. I am working on an ansible playbook to make certain configuration changes using netconf and yang. It works just fine against a CSR1000v running 16.9.4, but when I try the ASR1001-X I get the error below. ...

pyATS Schema Question : NXOS Parser

Hi Guys I am hoping someone may be able to help with a basic pyATS query surrounding an NXOS parser. I am using the parser for the command 'show ip interface vrf <vrf_name>' and capturing this within my python script to a variable. I can see in the s...

IOS XE YANG Model to Reload/Reboot Router

Hello, I am trying to find a model to perform a remote reboot/reload for my IOS XE 16.9 (ASR 920) device, but have not been able to find anything similar on this page https://github.com/YangModels/yang/tree/master/vendor/cisco/xe/1693Does such a meth...

Allow granular access to roles on Cisco Prime

I have our Cisco Prime 3.7 integrated in Cisco ISE 2.4 for AAA using TACACS and all is good. I would like, however, to be able to allow our help-desk the ability to restart an AP while logged into PI but not sure what specific profile attributes I n...

Cisco Prime API: # of connections per SSID

Hello All 1. What is the best way to pull # of connections per last 24 hours?It took 3-4 hours to get everything out of "/v3/data/HistoricalClientCounts.json?.full=true&id=gt(target)&.maxResults=1000" using paged request. I can alter the get request...

Issue creating Sample Loopback Interface Script Using OpenConfig!!

I am trying to create and run the openconfig script which is shown as a sample in DevNet tutorial NETCONF/YANG on Nexus Part 3: Using OpenConfig YANG Models on Nexus Switches. The file as an example is add_oc_loopback.py. The file contents are :#!/us...

APIC-EM Discovery finds device but doesnt add to inventory (and cant find others...)

Ok, so Im just trying to get APIC-EM running and I keep running into this issue no matter what i do.I've attached a net diagram to clarify...Currently running APIC-EM Version 1.6.4.30024. The issue I have is that I can find one device and it wont spi...

pnp discovery stopped(config wizard)

I have a 2960x-48LPS-L switch I connected to the console cable The first command I tried to enter was the switch hang for a few seconds and I encountered a pnp discovery error.There is a new switch I had just opened my boxDoes anyone know what the pr...

Automation and Analytics

Forum Posts

Resolved! Prime API and clientDetails API

APIC-EM huge postgre data

Resolved! Prime Infrastructure ReST API Calls

Multiple yang subfilters treated separately

Resolved! Apply EasyQoS to Single Device

IOS-XE Dial out reconnection time

YDK with openconfig-interfaces issue with NCS5k

IOS XE ASR1001-X Ansible/Netconf identityref error

pyATS Schema Question : NXOS Parser

IOS XE YANG Model to Reload/Reboot Router

Allow granular access to roles on Cisco Prime

Cisco Prime API: # of connections per SSID

Issue creating Sample Loopback Interface Script Using OpenConfig!!

APIC-EM Discovery finds device but doesnt add to inventory (and cant find others...)

pnp discovery stopped(config wizard)

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Ansible L3 Interface Configuration for IOS without cli modules

API REST v4 - metrics intraffic TIME_SERIES - no returning data

Terraform for IOSXE

How do YOU automate your network?

Anisble ACI - How To Store/Run App Profile Configurations

Matrix for ZTP Process on IOS-XE Devices

Pause Function in Cisco cli librairy

Does Cisco plan to include python librairy "requests" in Guestshell

subtree-filter support with yang-push subscription

Create a ansible play that requires user input