06-22-2018 04:00 AM - edited 03-01-2019 04:43 AM
Hi all,
I am having a small issue... When I try to provisioning my C3560CX model running software version
Switch Ports Model | SW Version | SW Image | ||
------ ----- ----- | ---------- | ---------- | ||
* | 1 12 | WS-C3560CX-8PC-S | 15.2(4)E4 | C3560CX-UNIVERSALK9-M |
I am getting this error:
Received response from pnp agent for message correlatorId: CiscoPnP-1.0-50-370-B44C140-47 but with error code : ZTD_CMD_ERROR Response String: PERMISSION_DENIED:authorization failed
I can see when I google that some are referring to other software version, but also that I could be something with aaa methode.
Here I am using :
aaa authentication login default group TACACS-ISE local
aaa authorization config-commands
aaa authorization exec default group TACACS-ISE local
aaa authorization commands 1 default group TACACS-ISE if-authenticated
aaa authorization commands 15 default group TACACS-ISE if-authenticated
and the group is containing my TACACS servers.
Anybody that has some info on how to fix this??
I have also tried to run the aaa with a EM script like this:
! EEM SCRIPT
!
event manager applet POST_PNP
event timer countdown time 90
action 1.0 cli command "enable"
action 1.1 cli command "config t"
action 2.0 cli command "aaa authorization config-commands"
action 2.1 cli command "aaa authorization commands 1 default group TACACS-ISE if-authenticated"
action 2.2 cli command "aaa authorization commands 15 default group TACACS-ISE if-authenticated"
action 2.3 cli command "no event manager applet POST_PNP"
action 2.4 cli command "end"
action 2.5 cli command "wr mem"
action 3.0 cli command "end"
but that don´t change anything here.
Hope somebody might can give me some direction on this matter.
Frank
Solved! Go to Solution.
06-26-2018 11:46 PM
sure.
the configuration file needs to have "end" as the final statement.
That is outside of the EEM script.
e.g.
action 2.8 cli command "end"
action 2.9 cli command "wr mem"
action 3.0 cli command "end"
end
Adam
07-04-2018 03:09 AM
Ahh that did it... small thing to fix the issue....
Adam thanks for all your support here.
07-04-2018 03:12 AM
excellent. thanks for letting us know.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide