07-31-2018 01:23 PM
I have a Cisco CME 10.5 with SPA 300 Telephones, all works fine, except the Moh. The music on hold does not work, when I leave a call in hold or transfer it, the music does not sound. I add the relevant config that I have, please help
IOs:
version 15.4
!
ip multicast-routing
!
voice service voip
no ip address trusted authenticate
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
supplementary-service media-renegotiate
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
registrar server
no call service stop
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
!
voice register global
mode cme
source-address 172.22.100.1 port 5060
max-dn 20
max-pool 20
authenticate register
tftp-path flash:
create profile sync 1336445274419515
camera
video
!
voice register dn 1
number 101
allow watch
pickup-call any-group
pickup-group 33
name Rec
label Rec
!
voice register dn 2
number 102
allow watch
pickup-call any-group
pickup-group 33
name Lig
label Lig
!
voice register pool 1
id mac 00A2.895E.4527
number 1 dn 1
dtmf-relay rtp-nte
username test password test
codec g711ulaw
camera
video
!
voice register pool 2
id mac 00A2.895E.45B4
number 1 dn 2
dtmf-relay rtp-nte
username test1 password test
codec g711ulaw
camera
video
!
voice moh-group 1
moh enable-g711 "flash:moh.wav"
multicast moh 239.1.1.1 port 16834
extension-range 101 to 115
!
interface GigabitEthernet0/0.100
encapsulation dot1Q 100
ip address x.x.x.x 255.255.255.0
ip pim dense-mode
!
telephony-service
moh-file-buffer 10000
internal-call moh-group 1
no auto-reg-ephone
max-ephones 20
max-dn 20
ip source-address 10.175.123.178 port 2000
calling-number initiator
service directed-pickup gpickup
max-conferences 8 gain -6
moh enable-g711 "flash:moh.wav"
multicast moh 239.1.1.5 port 16834
transfer-system full-consult
create cnf-files version-stamp 7960 Jun 27 2018 15:11:47
!
I Apreciate your help
JB
10-05-2018 10:04 AM
Did you ever get this working? I want to test moh in my lab soon and wondering what things to look out for.
10-05-2018 11:35 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide