Our 3850 stack is experiencing spikes on the CPU due to the eicored process. I have researched and cannot figure out what this process is for.
Core 0: CPU utilization for five seconds: 33%; one minute: 21%; five minutes: 20%
Core 1: CPU utilization for five seconds: 34%; one minute: 14%; five minutes: 13%
Core 2: CPU utilization for five seconds: 46%; one minute: 12%; five minutes: 10%
Core 3: CPU utilization for five seconds: 74%; one minute: 14%; five minutes: 10%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
6672 713136 37170008 827 25.12 2.61 2.25 0 eicored
12647 1081072 13803930 349 3.16 3.19 3.37 0 iosd
6063 1496658 30551445 83 3.11 3.32 3.36 1088 fed
6671 1421287 26318632 517 1.85 2.50 2.56 0 ffm
6065 3682202 16200098 83 0.44 0.59 0.62 0 stack-mgr
6690 808119 95777566 148 0.39 0.06 0.08 0 snmp_subagent
6663 3907707 38975060 57 0.19 0.10 0.10 0 pdsd
6655 3456620 3582470 964 0.10 0.01 0.01 0 oom_poll.sh
12636 3924067 27736182 13 0.10 0.17 0.15 0 wcm
12637 2789072 96014367 7 0.10 0.01 0.04 0 table_mgr
6064 2395290 18911801 18 0.05 0.12 0.11 0 platform_mgr
6596 1076222 72041363 74 0.05 0.05 0.05 0 idope.py
6654 458220 39675190 11 0.05 0.05 0.05 0 profiled
6674 3275623 75659038 951 0.05 0.05 0.05 0 cpumemd
The average usage is pretty low but then these spikes can get pretty high. Can't run debugs as by the time the command runs the CPU usage has gone down
