Cisco Bug Discussions

Hi, i'm wondering if this was ever implemented or looked into? I have a situation with infra as code deployments where we reserver and release IPs from our IPAM and end up in a situation where a same IP with different MAC can be used within minutes. ...

there is a bug that might be treated as limitation, but it's still not documented at all. there is no information on RV260 datasheet page(https://www.cisco.com/c/en/us/products/collateral/routers/rv260-vpn-router/datasheet-c78-741409.html) as well as...

I have a C9800-L-C running the latest recommended IOS-XE version 17.3.3 MDI am unable to set the correct timezone.Both the GUI and the CLI let me set it without error, but it never updates, and the commands do not show in the config. I see there is t...

Dears Please help me to fix this issue Regards

FYI and 11.6.2 despite "fixed" in 11.6.1

I have a similar error on a 2951 running v15.3(3)M3 The router issues the following error every few seconds even after resetting config to default: "{timestamp}: Delayed UCSE configuration: Module in slot 0 not found" There are no service modules ins...

After upgrade to Prime Infrastructure 3.9 from 3.7, DNS lookup didn't work from PI, and therefore repository URL didn't work because we are using DNS names for host-lookup.  After disabling Secure DNS as per bug fix, DNS lookup from Prime Infrastruct...

Hi,We want to use a alias with load balancing with our 4 cuic sub.Is there a way to make it work without the multisan certificate ? We are using Microsoft AD Certificate Service,is it possible to add Subject Alternative Name in  Additional Attributes...

Dears, Kindly need your help , i have 9600 sw with 2 sup with IOS 16.12.5 and when power on the switch the switch stuck in initialization and after rebooting the switch power the switch up with out any logs and this issue happened several time in lon...

My customer opened a TAC Case on this issue and was told there is a fix in Jabber release 14.0.1 but it has not been released yet.  TAC told the customer to reach out to the Cisco Account Team for a beta release of 14.0.1.  Is this possible or should...

Cisco recommended to disable LDAPS and fallback to LDAP for the Realms-Direcorty integration.   Anyone else have a problem with this recommendation besides myself?

hello, i have an issue when connecting Managment port of Standby RP card of ASR1006 (Release 15.5(3r)S1), the probleme is that the port is always down, while the port in active card is UP and works normally ? can you help me for this issue ? thanks 

hi all,just wondering if it is clear for everyone how to setup Client-to-Site IPSec VPN with Admin guide in terms of "Remote identifier" fields. it is described much better into RV180 guide: https://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv18...

HiDoes anybody know wether this bug is still present in the release 16.12.5b ?Many thankskind regardsLaurent

ver  cat3k_caa-universalk9.16.06.05.SPA  Switch# sh switch   , show up ok-------------------------------------------------------------------------------------*1 Active 706b.b96d.7e00 15 V07 Ready2 Member dceb.942f.a500 1 V05 Ready later error: %SIF_M...