Hellowe have a problem that when the customer is calling to the call center, and in the minute that the call is enqueued to the csq the customer disconnects the call, the agent received the call and without the ANI, only the 5 digits of the cti port....
Oct 28 2020 04:44:31.448: %SYS-5-CONFIG_I: Configured from console by spw010 on vty0 (10.255.82.221)Oct 28 2020 04:46:32.125: %MCAST-SP-3-QUERY_INT_MISMATCH: Snooping Querier received a non-matching query interval (125000 msec),from querier address (...
Hello everyone,We are having trouble with a Cisco WS-C3850-24P running version 16.6.7, rebooting itself several times and sending this logs:%IOSXE-4-PLATFORM: Switch 1 R0/0: kernel: EDAC MC0: 1 CE DIMM 0 rank 0 bank 7 row 56455 col 7348 on any memory...
Hello , Hello ,We are currently experiencing the same problem as the one cited,The only difference is that we are in :SoftwareBIOS: version 2.1.2Power Sequencer Firmware:Module 1: v4.0Module 1: v4.0Fabric Power Sequencer Firmware: Module 1: version v...
Has anyone got the fixed for the mentioned above error? I have removed the WebEx app and Productivity Tool and installed to most recent versions, as were directed by Cisco Support Tech, but I am still unable to start my hosted meeting from the Deskto...
I am teaching CCNA2v7:Switching, Routing, and Wireless Essentials and I noticed that the answers to the Module Quizzes at the end of each chapter are not always correct. Specifically, every time you choose the option "Show Me" you get a different ans...
The proposed Workaround (i.e., Ensure that the primary cucm node for registration is always available) does not seem plausible. Any idea if this will be fixed in later version? Since 90% of our Jabber users use OAuth for SSO this bug is a show stopp...
Does anyone know if this bug also applies to version 8.2(3) as we are logging increase frequencies of these message for our Nexus7700 C7710 's with "Supervisor Module-2" . Thank you
We have the same alert displaying. The system has performed without an issue for the last 2 months with this alert present. Only today did we get some NFE issues, that were resolved by simply rebooting the sensors.However this alert is still present ...
Is there really no workaround for this?It is the latest version of 8.0 and it is broken. How do you add it to Prime?Prime can't login either. I know it's kind of old - but people are still using it. Thanks