I have 6K switch and I am not able to execute the command on my new CAT 9400 SW.platform qos vlan-based<<<<<< Unable to execute this commandSW_9K_IOS16.9.3(config-if)#platform qos vlan-based ^
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html#_Toc487184246
say that Minimum Software Release Required for N3K-C3524P-10GX to support 1g SPF is NX-OS 6.0(3)A6(1)
But latest version ...
We recently upgraded two domains to 4.0(2d) and both FI in both domains show file systems "clean with errors". We have more domains to upgrade and we expect to see the same on all.We are working with TAC to clean FI-A on one domain sitting at 3.1(2d)...
That problem faced me now, My OS is Version 12.2(55)SE7.
Log:
%AAA-3-DROPACCTFAIL: Accounting record dropped, send to server failed: system
.07:09:05.660: %SNMP-5-COLDSTART: SNMP agent on host is undergoing a cold start
It was acted itself , reboot...
I get the same error on version: Manufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerBuild Info....................................... Engineering SpecialProduct Versio...
is the engineering special resolving this issue released?its the same issue on cucm. i had to convert all my certificates to single name and that was a pain
Hi Friends, I am getting this error on one of our production access switch. On the interface 1/0/46, there is connected a Cisco phone which is again and again freezing and rebooting. More details are given below. May 14 08:38:28.246 CDT: %PM-3-INTER...
Hi everyone, we are facing a issue about Catalyst 3650 management interface,somtimes,we can find the gi0/0 status of 3650 is down/down,and it will reovery auto after serveral seconds. Just like this: .May 10 18:11:12.770 Beijing: %LINK-3-UPDOWN: Inte...
Hello all, Thank you for your time in advance, and want to ask if this defect is resolved and the fix integrated into any current Jabber v12.1, or later release please? Have a problem symptom that matches this description, and the Jabber for Windows ...
Hi, i have the same symptom, in a Cisco IOS Software, ME380x Software (ME380x-UNIVERSALK9-M), Version 15.4(3)S2, RELEASE SOFTWARE (fc1) in some cases the CPU is in 40% avg, but i have max of 100% show processes cpu sortedCPU utilization for five seco...
I ran into this same issue on a CUCM 11.5 system on May 14, 2019. The conditions and error message of "/usr/local/platform/bin/startcliscript.sh: fork: retry: Resource temporarily unavailable" were the same. I ended up having to reboot the CUCM Publi...
We are hitting this bug as well and it is absolutely annoying to get this message 10-15 times or even more a day. At the moment, that is the main reason why our users didnt use Jabber at the iPhone. Does the low severity means that the error will not...
