11-25-2013 01:37 PM - edited 03-20-2019 08:07 PM
Hi, I have the following problem. May be it is regarding this Bug. A redirected call comes from CUCM to H323 VGW and leave Pots Dialpeer BRI S0 ISDN as a Q931 Setup Message. But redirected number is not seeing in Outgoing Q931 Setup, only the Calling and Called Party Number.
It should be transmitt also the Redirected Number.
Any help are appriciate.
Thanks in ahead.
HTH, please rate all useful posts!
Best Regards Armin
11-25-2013 02:05 PM
Hello Armin, Please confirm the call flow. I think i hear you saying the call flow is:
IOS1->h.323->CUCM->H.323->IOS2->BRI
A few questions:
This problem breaks down into if CUCM is sending it and then if IOS is passing it from h.323 to ISDN BRI leg. Debugs will help to confirm where redirecting number is being dropped.
You may consider opening a Cisco TAC case for additional assistance. I recommend starting with Communications Manager.
Regards,
Wes
11-26-2013 01:22 AM
Hi, thanks for your replay and support. The Redirect recieve the IOS VGW. I see that in the Trace at the Voice GW. I have found the problem now. After I set this Parameter
tkgwdemo(config-if)#isdn out ie redirecting-number
it works.
Here the config.
interface BRI0/1/0
description QSIG MRS
no ip address
isdn switch-type basic-net3
isdn overlap-receiving T302 3000
isdn protocol-emulate network
isdn layer1-emulate network
isdn incoming-voice voice
isdn outgoing display-ie
isdn outgoing ie redirecting-number
isdn static-tei 0
isdn skipsend-idverify
!
Nov 26 09:23:33.451: ISDN BR0/1/0 Q931: TX -> SETUP pd = 8 callref = 0x10
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x2181, '006157915399'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '62991'
Plan:Unknown, Type:Unknown
Redirecting Number i = 0x00008F, '106'
Plan:Unknown, Type:Unknown
HTH, please rate all useful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide