cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
946
Views
5
Helpful
4
Replies

CSCto07667issue with two of his 2x3750 stacks- unable to do write mem

Asim Afzal
Level 1
Level 1

Hi Team,

 

Getting below error while saving the configuration

 

Unable to save the configuration due to error '' Unable to open flash config.txt.new'' 

I can see below below bug detail but i can;t see details

 

CSCto07667issue with two of his 2x3750 stacks- unable to do write mem

 

Below is show ver

 

Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 13-May-15 22:53 by prod_rel_team

ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)

AUH-ICHQ-SER-13Flr-SW uptime is 21 weeks, 3 days, 7 hours, 5 minutes
System returned to ROM by power-on
System restarted at 15:32:32 GMT Fri Aug 31 2018
System image file is "flash:c3750e-universalk9-mz.150-2.SE8.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Level: lanbase
License Type: Permanent
Next reload license Level: lanbase

cisco WS-C3750X-48P (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID
Last reset from power-on
2 Virtual Ethernet interfaces
1 FastEthernet interface
132 Gigabit Ethernet interfaces
6 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

 

 

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

@Asim Afzal wrote:

Unable to save the configuration due to error '' Unable to open flash config.txt.new''  


That's not a bug.  This means that flash already contains a file called "config.txt.new".  

we are saving with command  wr mem and getting that error.

 

So what needs to be done

we are saving with command  wr mem and getting that error.

 

So what needs to be done

1. Post the complete output to the command "sh boot";
2. Try the command "copy run start"