CSCuq21425 - CoreDump due to SIP Trunk Configuration to SME
Ran into this issue today in our CUCM environment where our CUCM Publisher had a CoreDump. My CUCM backtrace is below. This turns out to be in reference to Bug ID CSCuq21425 and caused because the SIP Trunk on the Leaf CUCM Cluster only has 1 SIP trunk to the SME, with both of the SME IP addresses.
#0 0x09ccbce1 in sipSPIEventInfo (type=1093480749) at sip_common_utils.cpp:4547 #1 0x09c63ba9 in sipSPIRequestDNSQuery (ccb=0xe2f788e0, dest_name=0xe2f79670 "DEN-VCS-C-1-A.hcs.iscgobeyond.co", query_agent=1, port_present=1 '\001') at sip_common_core.cpp:471 #2 0x09c95898 in act_idle_outbound_options (ccb=0xe2f788e0, msg=0xe21c2030) at sip_common_spi.cpp:14639 #3 0x09ca72eb in ccsip_spi_process_ccapi_event (event=0xe21c2030) at sip_common_spi.cpp:19635 #4 ccsip_process_sipspi_queue_event (event=0xe21c2030) at sip_common_spi.cpp:19966 #5 0x09333031 in SIPHandler::ccsip_ping_request (this=0xea7c0280, sipPingReq=...) at ProcessSIPHandler.cpp:13422 #6 0x09333159 in SIPHandler::wait_SIPPingReq (this=0xea7c0280, s=...) at ProcessSIPHandler.cpp:3104 #7 0x09e4956f in SdlProcessBase::inputSignal (this=0xea7c0280, rSignal=0xef44c680, traceType=SdlSystemLog::SignalThreadedWithPriorities, highPriority=0, normalPriority=0, lowPriority=0, veryLowPriority=0, lazyPriority=0, dbUpdatePriority=0) at SdlProcessBase.cpp:406 #8 0x09e74014 in SdlThreadedProcess::threadQueueReader (this=0xea7c0280) at SdlThreadedProcess.cpp:110 #9 0x09e7423f in SdlThreadedProcess::threadQueueReaderInit (sdlThreadedProcess=0xea7c0280) at SdlThreadedProcess.cpp:75 #10 0xf68a3b39 in start_thread () from /lib/libpthread.so.0 #11 0xf69a4c2e in clone () from /lib/libc.so.6
Resolution: Create a separate SIP Trunk to both SME nodes and add them in a single Route List.
How to complete the RMA order.
How to complete the RMA order initiated by Cisco TAC engineer.
Once the RMA is initiated by the TAC engineer.
Customer will receive an email with the link to complete the order.
Click on the link provided i...
Introduction to Essential Utility for Optical Network Professionals
This utility will serve as ready-made handy calculator/conversion requir...
There are few interoperability issues between 2960x and other vendors. In this article we will go over the steps on how to debug these issues.
Check the phy id from “show controllers ethernet-controller phy” output.
<snip from show controllers ethe...
It appears that you are trying to access end of life information from Cisco search. We have detected a problem with your script ("eol...) and would like to help. Please contact firstname.lastname@example.org if you would like support.