*Sep 12 10:00:06.786: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Sep 12 10:00:09.801: %IOSD_INFRA-6-IFS_DEVICE_OIR: Device usbflash0 added
*Sep 12 10:00:14.675: dev_pluggable_optics_selftest attribute table internally inconsistent @ 0x1D4
*Sep 12 10:00:23.772: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Sep 12 10:00:24.643: %LINK-3-UPDOWN: Interface Lsmpi18/3, changed state to up
*Sep 12 10:00:24.644: %LINK-3-UPDOWN: Interface EOBC18/1, changed state to up
*Sep 12 10:00:24.645: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
*Sep 12 10:00:24.645: %LINK-3-UPDOWN: Interface LIIN18/2, changed state to up
*Sep 12 10:00:24.850: WCM-PKI-SHIM: buffer allocation failed for SUDI support check
*Sep 12 10:00:24.850: PKI/SSL unable to send Sudi support to WCM
*Sep 12 10:00:25.300: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Channel UP!
*Sep 12 10:00:25.301: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Sep 12 10:00:12.243: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is nocable
*Sep 12 10:00:12.243: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is down
*Sep 12 10:00:12.243: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is nocable
*Sep 12 10:00:12.243: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Sep 12 10:00:12.243: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Sep 12 10:00:12.243: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Sep 12 10:00:12.243: %STACKMGR-6-ACTIVE_ELECTED: Switch 1 R0/0: stack_mgr: Switch 1 has been elected ACTIVE.
*Sep 12 10:00:25.372: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Sep 12 10:00:25.697: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi18/3, changed state to up
*Sep 12 10:00:25.697: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC18/1, changed state to up
*Sep 12 10:00:28.457: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Sep 12 10:00:30.157: %IOSXE_MGMTVRF-3-AFI_ATTACH_FAIL: Management VRF AFI ipv6 attach failed
*Sep 12 10:00:30.242: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-vrf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Sep 12 10:00:36.152: %SYS-5-CONFIG_I: Configured from memory by console
*Sep 12 10:00:37.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to down
*Sep 12 10:00:37.131: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.6.6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Thu 11-Apr-19 02:24 by mcpre
*Sep 12 10:00:37.312: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Sep 12 10:00:39.132: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
*Sep 12 10:00:39.134: %LINK-3-UPDOWN: Interface Vlan100, changed state to up
*Sep 12 10:00:42.704: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Startup Config Present)
*Sep 12 10:00:45.451: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
IBA-KANDKOT-CORE>
IBA-KANDKOT-CORE>
IBA-KANDKOT-CORE>
*Sep 12 10:01:06.255: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/8, changed state to up
*Sep 12 10:01:07.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/8, changed state to up
*Sep 12 10:01:16.846: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/8, changed state to down
*Sep 12 10:01:17.844: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/8, changed state to down
*Sep 12 10:01:20.153: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/8, changed state to up
*Sep 12 10:01:21.153: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/8, changed state to up
Chassis 1 reloading, reason - Reload command
*Sep 12 10:01:25.839: %IOSXE-0-PLATFORM: Switch 1 R0/0: Sep 12 10:01:25 pvp.sh: %PMAN-0-PROCFAILCRIT: A critical process platform_mgr has failed (rc 134)
*Sep 12 10:01:26.116: %IOSXE-3-PLATFORM: Switch 1 R0/0: Sep 12 10:01:26 pvp.sh: %PMAN-3-RELOAD_SYSTEM: Reloading: Peer switch is not standby ready. System will be reloaded
*Sep 12 10:01:26.196: %STACKMGR-1-RELOAD: Switch 1 R0/0: stack_mgr: Reloading due to reason Reload command Sep 12 10:01:33.764 FP0/0: %PMAN-5-EXITACTION: Process manager is exiting: reload fp action requested
*Sep 12 10:01:33.691: %IOSXE-5-PLATFORM: Switch 1 R0/0: Sep 12 10:01:33 pvp.sh: %PMAN-5-EXITACTION: Process manager is exiting: reload fp action requested
IBA-KANDKOT-CORE>
IBA-KANDKOT-CORE>Sep 12 10:01:51.608 RP0/0: %PMAN-5-EXITACTION: Process manager is exiting: rp processes Sep 12 10:02:21.672 RP0/0: %PMAN-3-PROCESS_NOTIFICATION: System report /crashinfo/system-report_1_20190912-100215-UTC.tar.gz (size: 7628 KB) generated
octeon_wdt: WDT device closed unexpectedly. WDT will not stop!
reboot: Restarting system
