cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

228
Views
15
Helpful
2
Replies
Beginner

CSCvc78510 - Cisco 2702 AP aux port goes to disabled after the AP is rebooted

Hello All,

I've been using 2702i with 15.3(3)JF1 and this bug still exist although this version is shown as fixed release. Am I missing something?

Cheers,

2 REPLIES 2
Hall of Fame Community Legend

Re: CSCvc78510 - Cisco 2702 AP aux port goes to disabled after the AP is rebooted

Raise a TAC Case. Maybe they can publish an special engineering release.
Highlighted

Re: CSCvc78510 - Cisco 2702 AP aux port goes to disabled after the AP is rebooted

Hi Adam,

 

I'm also having a same sort issue on a Autonomous 2702i AP in combination with 15.3(3)JF10 (8.5.151.0) software, when it is connected to an PoE 802.3af power source. Then when the AP reboots or lost power and come's back online, I need to manually enable the AUX port (it reverts to shutdown in the configuration).

 

But when the 2702i autonomous AP is connected to an PoE+ 802.3at power source, the AUX port stays operational after the AP reboots of lost power and comes back online.


Is your AP connected to an PoE or PoE+ power source?

 

The documentation is not clear if you can use the AUX port when the AP is connected to an PoE (802.3af) power source in a particular software version.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here