I wanted to ask if anyone is experiencing this issue with 9300 Switches.
We have a C9300 Switch in a Stack having a Group of 4 ports (9,10,11 and 12) that suddenly stopped forwarding traffic and started to count errors (Input errors and Runts) PoE is working but on all ports. If you connect a phone it stays in "configuring IP" and no data is transmitted. if you plug a Laptop or PC ports turn to up/up or non-connected but never transmits any traffic. PC just mark adapter as disconnected.
Lights on the switch are blinking between Green/Amber.
We are running version: Version 16.6.3 (Everest)
This seems to be a Hardware Bug with Number: CSCvi49725.
They recommend to reload the box and if it doesn't fix the error the box must be replaced.
It will be great if anyone can share their experience with the same issue.
Solved! Go to Solution.
We just installed 9300 switch stack at one of the branches. There were cameras connected to the 3rd stack and we noticed that the last 4 ports (45 thru 48) were showing connected and power inline was showing auto. But the LEDs kept going amber and green. Cameras came up after the connections were moved to different ports on the stack.
We tried bring the code from 16.8.1a to 16.6.4 but no help. Cisco recommends a patch that is not even available at this time.
We have not yet, we opened a TAC case and they are giving us a version of 16.6.4 that should fix this issue. We are planning on applying it this weekend.
Great News that you had the chance to test the new image!
Fortunately this was a software bug and not a hardware bug. I got worried when CISCO told me to "upgrade" and if ports doesn't come up then open an RMA...
It looks like the available 6.6.4a release fixes this. Haven't tried installing it yet, but it lists the bug under the resolved caveats.