CSCvp48873 - C2960L " snmp mib flash cach" add automatically on On 15.2(7)E0a
Additional info. Just installed 15.2(7)E on a couple of 3560CX's:
= "snmp mib flash cache" reappears if the switch is restarted. Workaround must be applied each time.
= snmp changes of any kind require a restart of the switch.
Anyone have 15.2.7E0a(ED) running on a 2960X? Does it have the same problem?
UPDATE: Looking like an issue for all 15.2.7E variants, and not limited to compact models. Just installed 15.2.7E1 on a 2960X, and bingo, there's that pesky flash cache statement. Otherwise working OK so far.
Full analysis if the problem
The root cause behind this problem is the delay in sync between CUCM and CCX.
CCX and CUCM has an automated sync mechanism which might vary from 5 - 10 minutes based on various parameters.
Also there is an option to sync...
Asset Recovery EMEAR ScopeTest1Test2
This event had place on Thursday 14th, Janaury at 9:30 hrs PDT
-This Support Talk event is a special session of the “TAC Tools Explained Series”-
This event provides a practical introduction to Cisc...