cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3514
Views
0
Helpful
2
Replies

CSCvs94143 - IOS shim client ngwc fed bipc' has taken msec (runtime 0 msec) to process a 'unknown' message

fabian@zurich
Level 1
Level 1

in our environment, we have 16.9.5, and after 4 entries, our Uplinks went down:

Oct 9 2020 05:59:02.711 CEST: %IOSXE_INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client 'ngwc fed bipc' has taken 10384 msec (runtime: 0 msec) to process a 'unknown' message
Oct 9 2020 06:04:22.759 CEST: %IOSXE_INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client 'ngwc fed bipc' has taken 10044 msec (runtime: 0 msec) to process a 'unknown' message
Oct 9 2020 06:04:53.319 CEST: %IOSXE_INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client 'ngwc fed bipc' has taken 13844 msec (runtime: 0 msec) to process a 'unknown' message
Oct 9 2020 06:05:21.073 CEST: %IOSXE_INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client 'ngwc fed bipc' has taken 22132 msec (runtime: 0 msec) to process a 'unknown' message
Oct 9 2020 06:05:22.093 CEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to down
Oct 9 2020 06:05:25.052 CEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to up
Oct 9 2020 06:05:25.492 CEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/4, changed state to down
Oct 9 2020 06:05:49.569 CEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/4, changed state to up

2 Replies 2

WGL_BK
Level 1
Level 1

I'm also on 16.9.5 and saw this recently.

This bug talks about it but there's no fix
Bug Search (cisco.com)

sphillips
Level 1
Level 1

Mine too on 16.9.3. Any resolution other than a firmware upgrade?