cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
732
Views
0
Helpful
0
Replies

Platform assertion failure in hacl_pacl.c : 803

bcoverstone
Level 1
Level 1

%ACLMGR-4-UNLOADING: Unloading PACL input label 18 Gi0/1 IPv6 feature
platform assert failure: !label_info->ipsg_vmrs: ../src-hulc/src-common/hacl_pacl.c: 803: hacl_pacl_add_ipsg_to_portlabel
-Traceback= 6F4874z 32902B0z 306C9F4z 3078900z 3078B74z 3079BF0z 3270890z 3270B58z 370C1E8z 3708568z

 

Gi0/1 Port config:

interface GigabitEthernet0/1
 description WIRELESS AP
 switchport trunk allowed vlan 8-15
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 1000
 switchport mode trunk
 switchport nonegotiate
 switchport port-security maximum 100
 switchport port-security violation restrict
 switchport port-security aging time 5
 switchport port-security aging type inactivity
 switchport port-security
 ip device tracking maximum 100
 ip arp inspection limit rate 2000
 load-interval 30
 ipv6 source-guard
 storm-control broadcast level pps 10k
 storm-control multicast level pps 10k
 no vtp
 spanning-tree portfast edge trunk
 spanning-tree bpduguard enable
 ip verify source
end

 

I'm thinking that the ipv6 source-guard without an explicit policy may have caused this.

0 Replies 0