11-07-2022 02:03 AM - edited 11-07-2022 02:04 AM
Hello,
I'm asking you because I can see all my switches located in the same VLAN as the one where CBD is installed. But I can't see the switches located in another VLAN.
However in the configuration I added the subnetwork associated with the switches of the other VLAN in the discovery option of CBD.
Namely VLAN of the CBD with the switches seen 172.20.1.0/27.
VLAN other switches 172.20.20.0/27
But it does not work.
I join you a picture of the network addresses seen by CBD. I do not understand why it sees 198.168.200.2/24 when I have not configured this range.
How can I add in the networks section OVERVIEW - Subnet my VLAN networks for the other Switches.
For information section VLAN :
VLAN2 = Network of process switches + CBD (works well 21 switches of overdraft)
VLAN10 = Network of other switches (Not functional CBD does not see the switches of this VLAN).
I have the impression that the discovery of equipment located in another VLAN than the CBD one does not work properly.
Thanks in advance
Solved! Go to Solution.
12-13-2022 04:59 AM - edited 12-13-2022 05:00 AM
Hello,
Now everything is working properly. Thank you very much
12-13-2022 02:55 PM
You're most welcome
12-14-2022 05:07 AM - edited 12-14-2022 07:23 AM
Many thank
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide