Cisco Catalyst Center

Hi, We are on the process of enabling Stealthwatch on our network and one of the requirements is to configure netflow on the devices.  Is there a way to configure netflow via DNA Center?  I tried to enable it via telemetry on DNA Center but it seems ...

Dear All, we've below BOM and want to use ISE, Prime Infrastructure and other services included in DNA premier but we want to make sure what additional components must be added to use those features and what exact features or services do we have apar...

Hi All, Need your support to know if vWLC code for 9800(16.12.03) and DNAC version 2.1.2.6 will work or not.     

Hi, How do I look at all the syslog messaged the DNA Center has received from a network device?Any way it is possible to filter this information out in kibana, or another way?

Afternoon everyone, I have a DNA Center appliance on loan to test if it can replace our heavily automated APIC-EM Plug and play system.  One of the devices that was reported to be support is the C1117-4P and C1117-4PWE models we use a lot of, from th...

Hi community, Is there any way to send a notification (email, snmp trap or whatever) from C9800 or DNA-C when a new AP joins the WLAN infrastructure (or an AP joins with certain hostname pattern, like APxxxx.xxxx.xxxx)?I cnanot see any existing Subsc...

Hello, I have a question, if we don't connect the cluster port, it will have any impact in the DNAC functionalities (in case of standalone deployment). RegardsCisco DNA Assurance 

HiDoes anyone have any information on the possibility to schedule OBIEE reports using the Tidal Scheduler? Specifically, we want to pull reports from the Oracle Taleo cloud network but have not yet found a viable solution.Thank you

Hi All, can you please share the step by step procedure of 1800s sensor provisioning by wireless backhaul method. I've been through the document got confused about the URL port and the vlan in below link for sensor provisioning section. https://www.c...

We recently rebuilt our SD Access lab and I re-imaged the DNA-C with the 2.1.2.6 .iso image.  In the configuration for the Network Settings in Design an incorrect DHCP server was added.  The fabric was provisioned and the IP SLAs were automatically a...