07-15-2024 05:04 AM
Hello Gents,
i have 2 ISE nodes integrated with DNAC but recieve below errors. but there is rechability between ise nodes and dnac.
07-15-2024 05:50 AM
- Neither the ISE version or DNAC version are being mentioned , check this bug report for relevance :
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwb88254
M.
07-15-2024 06:32 AM
Hello Marce.
thanks for your reply.
both ISE nodes pxgrid is enabled.
primary node is connected and up but other has issue. both ISE nodes has same version
DNAC version is 2.3.5.5
07-15-2024 06:42 AM
- Since pxgrid is involved , the mentioned bug report could be involved , yet it mentions 2.3.5.4
as an already fixed version. I think you need to contact TAC on this one and or point to
the bug report and ask their opinions on it too.
M.
07-15-2024 06:45 AM
Does both nodes use the same certificate for pxgrid?
07-15-2024 08:08 AM
Hello Torbjorn,
both ISE DNAC use self signed certificate. we didn'nt change any certificate.
07-15-2024 09:40 AM
That's odd. It should have been trusted when you established the integration.
You should be able to fix it by downloading the certificate from the second node and importing it as trusted on your DNAC under "System" > "Settings" > "Trustpool". If that doesn't work you can try tearing down and re-establishing the integration during a maintenance window.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide