I'm doing some tests with a CSR1000v, and I was able to bring up the peering in the EVPN AF, however it seems not to work and I cannot find anything in the release notes stating that it is supported. Does anyone knows if EVPN AF is supported on the CSR1000v?
Solved! Go to Solution.
I am Using Cisco CSR 1000v (Cisco IOS XE Software, Version 16.09.03).
Does it have EVPN VxLAN support ?.
As i was following few steps to configure EVPN and found that we don't have CLI commands to configure vlan to vni mapping !
needed CLI command: "fabric forwarding anycast-gateway-mac 2020.0000.00aa" , "vlan <vlan-number> ==> vn-segment" , "vrf context <name> ==> vni <vni_number>".
are there any alternate CLI for above.
Any help will be appreciated.