Hello everybody.
I have some troubles with CPU utilization on a Cisco CSR1000V Series Router. It periodically rises up to 100%. I found out a pair of documents about troubleshooting techniks for this kind of issues. These articles are: Troubleshooting High CPU Utilization on Cisco Routers, Troubleshooting High CPU Utilization. But I think that in the case of CSR1000V those articles are not so usefull and they have not helped me a lot. Mostly because this is a virtual machine that is executed on VMWare, but those articles are for "hardware" Routers.
Can anybody recommend me a good article about troubleshooting high CPU utilization for CSR1000V Series or for a Virtual Router?
P.S.: I tried to find something relative on Cisco-site, but found nothing. Maybe I have overlooked something. If so, please point out it.
Update: Some articles were beign advised to me but there are some small inaccuracies
http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/116213-trouble-asr-eem-00.html
http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/118901-technote-snmp-00.html
Update 2:
As a starting point for troubleshooting can be used: Cisco docwiki CSR1000V:Home
