cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1665
Views
10
Helpful
6
Replies
Beginner

CSR1000v eVPN AF

Hello All,

I'm doing some tests with a CSR1000v, and I was able to bring up the peering in the EVPN AF, however it seems not to work and I cannot find anything in the release notes stating that it is supported. Does anyone knows if EVPN AF is supported on the CSR1000v?

Thanks!

Cheers,

PM

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

I checked with the experts -

I checked with the experts - unfortunately CSR does not support EVPN AF.

6 REPLIES 6
Cisco Employee

I dont believe we can support

I dont believe we can support EVPN in AWS. AWS does not allow Layer 2 connectivity.

Beginner

Hi Nagaraj,Sorry this was

Hi Nagaraj,

Sorry this was probably not the best place, but I was asking about the CSR generally and not specifically about the AWS flavour.

Cheers,

PM

 

Highlighted
Cisco Employee

I checked with the experts -

I checked with the experts - unfortunately CSR does not support EVPN AF.

Beginner

Thx for your help Nagaraj!Hi

Thx for your help Nagaraj!

Beginner

Re: I checked with the experts -

I think this feature is there on ASR1000, but can you confirm this is still not supported on CSR  please ?

Beginner

Re: CSR1000v eVPN AF

Hi All,

 

I am Using Cisco CSR 1000v (Cisco IOS XE Software, Version 16.09.03).

 

Does it have EVPN VxLAN support ?.

 As i was following few steps to configure EVPN and found that we don't have CLI commands to configure vlan to vni mapping !

needed CLI command: "fabric forwarding anycast-gateway-mac 2020.0000.00aa" , "vlan <vlan-number> ==> vn-segment" , "vrf context <name> ==> vni <vni_number>".

 

are there any alternate CLI for above.

 

Any help will be appreciated.

 

 

Thanks

 

Vikram

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards