cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
127
Views
0
Helpful
0
Replies
Highlighted
Beginner

CSR1000v on AWS CPU load vs error log MCPRP-QFP-ALERT: Slot: 0, QFP:0, Load 100% exceeds the setting threshold(80%).

Hi,

I have a EC2 instance (T2-medium) that run CSR 1000v
Cisco IOS XE Software, Version 16.06.01
Cisco IOS Software [Everest], Virtual XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.6.1, RELEASE SOFTWARE (fc2)

3 or 4 times since march I got problem with it.

In the CSR 1000v log I got these log error:
Sep 30 19:08:01.784: MCPRP-QFP-ALERT: Slot: 0, QFP:0, Load 100% exceeds the setting threshold(80%).

In the CPU load in the CSR 1000 CLI there is no change.

CSR1000v-AWS#sh proc cpu history

1

522222222223223262211111121111111112111161111111111111111111111151111111
100
90
80
70
60
50
40
30
20 *
10 * * * *
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7..
0 5 0 5 0 5 0 5 0 5 0 5 0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%

In the EC2 CPU load there is a change.

from 12,5% average without any peak to 15% average with peak up to 55% since the problem start.

The last trouble was fixed with an EC2 instance stop/ launch sequence since the cisco CSR reload or EC2 instance reboot didn't fix the problem.

Here the CPU Load change on AWS cloudwatch

cpu.PNG

 

Any idea?

Thanks

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards