cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
792
Views
0
Helpful
2
Replies

Routing with DMVPN

geraldchow1
Level 1
Level 1

Hello, 

Trying to setup inter region connectivity with csr's and eigrp.

I have the tunnels up and can ping internal interfaces and tunnel interfaces from region to region.

I haven't had success egressing traffic between the csr to the other region.

The setup is an one armed topology  in each region.

 

 

Thanks in advance

 

1 Accepted Solution

Accepted Solutions

Brian Beisel
Level 1
Level 1

I had a similar issue between and AWS Windows instance and my data center.

I could trace and ping across the tunnel but no other traffic was making it.

Turned out that the Security Group on the CSR interface was only allowing SSH so once I opened it up I could RDP, etc.

Just a thought.

View solution in original post

2 Replies 2

Brian Beisel
Level 1
Level 1

I had a similar issue between and AWS Windows instance and my data center.

I could trace and ping across the tunnel but no other traffic was making it.

Turned out that the Security Group on the CSR interface was only allowing SSH so once I opened it up I could RDP, etc.

Just a thought.

I'm currently trying to setup up something similar.

 

Dual VPN Hub (Hub A Ireland AZ A - Hub B Ireland AZ B)

And DMVPN Spokes all around the world to build a Cloud Overlay. As an alternative WAN.

But currently i struggle with the NAT on both sides of the AWS clouds.

I think you have a similar problem. My configs look similar but i cannot even ping the tunnel endpoints :( because the proxy identities do not match

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: