05-04-2016 08:00 AM
Can anyone advise which cmdlet is used to see the local storage information of an FI?
I'm particularly interested in the bootflash.
Get-UcsNetworkElement has a TotalMemory property.
Solved! Go to Solution.
05-04-2016 09:12 PM
Hi Andrew,
You can use Get-UcsStorageItem cmdlet to get the local storage information of an FI..If you want the bootflash storage information then you can specify Name as bootflash.
For ex:
PowerTool C:\> Get-UcsStorageItem -Name bootflash
Name : bootflash
OperState : clean
Sacl :
Size : 16329
Used : 23
Ucs : XXXXXX
Dn : sys/switch-A/stor-part-bootflash
Rn : stor-part-bootflash
Status :
XtraProperty : {}
Name : bootflash
OperState : clean
Sacl :
Size : 16329
Used : 23
Ucs : XXXXXX
Dn : sys/switch-B/stor-part-bootflash
Rn : stor-part-bootflash
Status :
XtraProperty : {}
05-04-2016 09:12 PM
Hi Andrew,
You can use Get-UcsStorageItem cmdlet to get the local storage information of an FI..If you want the bootflash storage information then you can specify Name as bootflash.
For ex:
PowerTool C:\> Get-UcsStorageItem -Name bootflash
Name : bootflash
OperState : clean
Sacl :
Size : 16329
Used : 23
Ucs : XXXXXX
Dn : sys/switch-A/stor-part-bootflash
Rn : stor-part-bootflash
Status :
XtraProperty : {}
Name : bootflash
OperState : clean
Sacl :
Size : 16329
Used : 23
Ucs : XXXXXX
Dn : sys/switch-B/stor-part-bootflash
Rn : stor-part-bootflash
Status :
XtraProperty : {}
05-05-2016 12:19 AM
Brilliant, exactly what I was after. Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide