cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1758
Views
1
Helpful
3
Replies

Upgrading UCS C240 from version 2.0(6d) to 4.0(2c)

svadmin
Level 1
Level 1

Hello,

I am trying to upgrade our UCS firmware from version 2.0(6d) to 4.0(2c).    Can I upgrade from 2.0 to 4.0 directly, or do I need an intermediate step ?

 

 

 

 

 

 

 

1 Accepted Solution

Accepted Solutions

sankbhat
Cisco Employee
Cisco Employee

You should be able to do it.
Incase of all M4 servers for releases greater than 2.0(4c), you can directly move to 4.0(x)

Please refer the release note below.

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/b_UCS_C-Series_RN_4_0_2.html#id_83496

View solution in original post

3 Replies 3

sankbhat
Cisco Employee
Cisco Employee

You should be able to do it.
Incase of all M4 servers for releases greater than 2.0(4c), you can directly move to 4.0(x)

Please refer the release note below.

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/b_UCS_C-Series_RN_4_0_2.html#id_83496

Thank you Sankbhat for your response!!!

Where do you see you can upgrade from 2.0(6d) to 4.0(x) every cisco guide says you have to have two jumps to upgrade.   Even the link you sent says only if you have a C460 can you go from 2.0 to 4.0

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Cisco UCS X-Series Energy Efficiency Offer