cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Bare Metal Deployment of UCS Servers and Microsoft Windows 2012 with UCS PowerTool

2430
Views
5
Helpful
0
Comments

At Microsoft Management Summit 2013, Eric Williams and Jason Shaw delivered a presentation providing an overview over Cisco UCS PowerTool, integration of Cisco UCS with Microsoft Windows 2012 DHCP, DNS, and WDS demonstrating Bare Metal Windows 2012 installation on Cisco UCS, and integration of Cisco UCS with Microsoft Windows Hyper-V 2012 and Microsoft System Center VIrtual Machine Manager 2012.  Below are the scripts from the examples that were demonstrated at MMS 2013.

If you would like to watch the entire MMS 2013 session, please follow this link:

http://channel9.msdn.com/Events/MMS/2013/IM-B394

Integration with Micrsoft Windows 2012 DHCP / DNS / Windows Deployment Solution and Cisco UCS

This example shows end to end deployment of Cisco UCS plus Windows 2012.  In the script and video, you will see a UCS Service Profile being created from a UCS Service Profile Template, associated with a blade, DHCP and DNS entries created based on the hardware attributes derived from the service profile created, and Windows Deployment Solutions Pre-staged device was created from the hardware attributes derived from the service profile created and the unattended installation files needed to drive the unattended Windows 2012 installation.  After the service profile is fully associated and DNS / DHCP / WDS configurations are created, the server is powered on and WDS will automate OS installation utilizing the UCS Drivers added to the WDS driver repository previously. 

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.