This video blog gives a brief overview on the latest management pack
built for SCOM 2016. Features the following sections; Installing the
unified management pack Adding UCS Domains Viewing UCS Health and Faults
UCS Inventory UCS Performance Metrics
It is amazing how task that has 30 steps and took 1 day of professional
high skilled engineer can be accomplished now within 40 min by any
employe. This Demo was Done by Dror Bletter but it is the result of teem
work of entire teem.and many other automate...
This is a video/audio recording from MMS 2013 (Microsoft Management
Summit). Title: Automate your Infrastructure: Programmatic Management of
Cisco UCS with Microsoft System Center and PowerShell This session
covered deep dives into UCS PowerTool,UCS Integ...
This script automates the upgrade of UCS firmware (logging into CCO,
downloading firmware bundles to a local working directory, uploading
bundles to the target UCS System and walking through all steps of the
upgrade, including creation/assignment of a new...
Detailed in the video below is a joint PowerShell integration utilizing
both Cisco UCS PowerTool and VMware PowerCLI. The goal of the
integration is to show how easy it is in PowerShell to integrate across
different functional areas within a virtualized i...
At Microsoft Management Summit 2013, Eric Williams and Jason Shaw
delivered a presentation providing an overview over Cisco UCS PowerTool,
integration of Cisco UCS with Microsoft Windows 2012 DHCP, DNS, and WDS
demonstrating Bare Metal Windows 2012 instal...
I have 6332 FIs and network uplink is 40 Gbps ports that configured as breakout ports and connected 1 of the 4 ports to 10 Gbps upstream port on Cisco 7K switches.
I'm able to show cdp neighbor by SSH. But cannot get any output by PowerTool command G...
Looking for help on how to Set Fault Suppression on a Service Profile in UCS with Start Time and Duration.I can add one using Add-UcsFaultSupression cmdlet but unsure of how to set Start Time and duration.Any help will be greatly appreciated.
Hello all.I am trying to use the UCS XML API to retrieve the health status of a blade. The XML request I'm using is: <configResolveChildren inDn="sys/chassis-1/blade-1" inHierarchical="false" cookie...
I need to mass deploy and verify C Series serveri) CIMC Login Bannerii) CIMC Backup Config to remote tftp serverI can't find any cmdlets in CIMC Power Tools that allow us to configure the settings. Is there any alternate way rather than configure the CIMC...