With earlier releases of PowerTool (prior to 184.108.40.206), to get different UCS servers multiple cmdlets needs to be executed.
Suppose I have 3 UCS domains, with 2 UCS domains containing UCS B-series and C-series servers and 3rd domain containing UCS M-series servers. To get the serial number and model of all these servers, I will have the following cmdlet.
Get-UcsBlade | select serial, model
Get-UcsRackUnit | select serial, model
Get-UcsServerUnit | select serial, model
With the advent of Get-UcsServer cmdlet in PowerTool 1.4.1 you will not have to remember all different cmdlets to get server information. Get-UcsServer cmdlets returns all the servers, be it a blade server, rack server or server unit, irrespective of form factor.
So all the 3 cmdlets above can now be replaced with 1 cmdlet as shown below:
This script can be referred for configuring bare metal with vMedia policy.
Below are the global parameter which must be set before executing script according your requirement.
# Global Variables$ImageFileName = 'VMware-ESXi-6.7.0-9484548-Custom-Cis...
Hello, we want to configure raid in one of our cisco hx220c m5 nodes, however, the default raid controller(hx-sas-m5) doesn't support the raid. Therefore, it would be very helpful if anyone could suggest to me a raid controller that will be supported by t...
This script allows you to Create, Modify or Clear LDAP Group. You can use this feature for multiple IMC server or single IMC server. This sample script takes csv file as input for multiple IMC server LDAP group configuration. If you don't pass csv file ...
This script gives overall server status of IMC server.
The overall server status is calculated by IMC UI based on the IMC faults and their severity
Please provide me any comments, concerns or suggestions!
Hi all, I am trying to create a BIOS policy using PowerTool and UCSPE with this script:Start-UcsTransaction$newbiospolicy = Add-UcsBiosPolicy -Org $orgs -Name NewBiosPolicy2 -Descr "New powershell ...