cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

network-check.ps1

2664
Views
5
Helpful
0
Comments

UCS PowerTool script that checks the current bandwidth of all adapters in a domain.  For best results make sure that the collection interval is set to 30 seconds (set in the admin tab). 

Out put looks like:

...

Blade:  sys/chassis-1/blade-2

Service Profile:  org-root/ls-ESXi-1000v-01

        Vnic:  ether-Management-A  Tx:  0.000 Mbps / Rx:  0.000 Mbps

        Vnic:  ether-Management-B  Tx:  0.011 Mbps / Rx:  0.001 Mbps

        Vnic:  ether-N1kv-A  Tx:  0.000 Mbps / Rx:  0.010 Mbps

        Vnic:  ether-N1kv-B  Tx:  0.002 Mbps / Rx:  0.013 Mbps

        Vnic:  ether-Storage-A  Tx:  0.000 Mbps / Rx:  0.001 Mbps

        Vnic:  ether-Storage-B  Tx:  2.233 Mbps / Rx:  25.363 Mbps

        Vnic:  ether-VM-A  Tx:  0.127 Mbps / Rx:  2.341 Mbps

        Vnic:  ether-VM-B  Tx:  0.019 Mbps / Rx:  0.014 Mbps

        Vnic:  ether-vMotion-A  Tx:  0.000 Mbps / Rx:  0.000 Mbps

        Vnic:  ether-vMotion-B  Tx:  0.000 Mbps / Rx:  0.000 Mbps

...

I use the math on my blog entry I wrote on this to convert to Mbps:

http://benincosa.com/blog/?p=622

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.