UCS Blade Mgmt ips

[k.vineethchowdary]

Hi

In our environment there are 15 chassis with 8 blades on each its hard to find mgmt ips of blades.Can we pull this inventory using powertool?

[nveda · Accepted solution]

Hi Vineeth,

1. For IP's coming out from management IP pool -

PS C:\> Get-UcsIpPool -Name ext-mgmt | Get-UcsIpPoolPooled | select Id, AssignedToDn

Id                                                                                                                                                    AssignedToDn

--                                                                                                                                                    ------------

10.65.183.11

10.65.183.12

10.65.183.13                                                                                                                                          sys/chassis-1/blade-2/mgmt/ipv4-pooled-addr

2. For static management IP -

PS C:\> Get-UcsVnicIpV4StaticAddr | select Addr, Dn

Addr                                                                                                                                                  Dn

----                                                                                                                                                  --

10.65.183.10                                                                                                                                          sys/chassis-1/blade-1/mgmt/ipv4-static-addr

Thank you,

Nitin

[k.vineethchowdary]

Thanks Nitin

Get-UcsVnicIpV4StaticAddr | select Addr, Dn

This worked.