I had a customer ask me for a way to easily collect all serial number from a UCS so they could give to their services team to make sure everything was covered under their SmartNet contract. This is what I came up with.
This script allows you to log into a single or multiple UCS Domains and it will create an Excel spreadsheet of all the devices and their serial numbers.
Prerequisites: PowerShell v3 or greater enabled on your client machine Network access to your UCSM An account on your UCSM Excel installed on the client machine Cisco PowerTool for PowerShell installed in the client machine
v0.5 - Initial posted version
v0.5.01 - Added feature to exit script if you only provide a single domain and domain log in fails or if you are not logged into any UCSM.
v0.5.02 - Added one more error check for login
v0.5.03 - Found that older B230's that don't have DIMMs in a slot report their serial number as NO DIMM. Look for that and ignore entering those into the inventory.
v0.5.04 - Requires PowerShell V3 and now has a check to ensure you are running it or higher.
v0.6 - Added a column with the associated Service Profile for the equipment where applicable.
v0.7 - Added a column with the manufacturing date/time of the equipment where available.
v0.8 - Added section to collect local hard disk info
v0.9 - Added built in help. Command line options. Standard naming convention.
v0.9.0.1 - Added support for saved credentials file
v0.9.10 - Add fields with UCSM Licensing Information
As always, let me know if you have any questions, problems or suggestions.
I am not sure if this is the correct community for this question, so I apologize in advance.
I have the credentials to access my UCS's SoL interface via ssh, but after I logon I do not get a prompt or anything.
All I see is ...
Hi allWe have UCS + VMware and vROPs here. I see CISCO have a plugin so I could view our UCS estate within our vROPS instance, its available to download in my portal, but is it licensable or is this a freely available piece of code..??(Location below...
I use vRealize Orchestrator to create workflows everyday and was given a task to integrate with UCSC plugin and work on creating VLANs on our B200 M4 blades.I see that there are only a few sample workflows but I have made my way to figuring out some of th...