Cisco Digital Network Architecture (DNA)

This community is for technical, feature, configuration and deployment questions. For production deployment issues, please contact the TAC!
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

Resolved! Heatmap DNAC

Hello AllCould someone please clarify if the WLAN heatmap in DNAC only reflects the RF calculations made by the APs and WLC or does the AP placement on the heatmap have any influence on the calculations?For example in a room with 2 APs, I decide to m...

Resolved! Can I automate my network without using C9000 switches?

First off, it was my understanding that the C9000 switches were the only SDN switches Cisco has. It was also my understanding that you need SDN switches to be compatible with DNAC and to automate the management of those devices. After talking with a ...

NCOB02074: Connecting Timed out. Check the device connectivity with the server.

Hi everyone, I get this error message: NCOB02074: Connecting Timed out. Check the device connectivity with the server when trying to enroll a WS-C2960X-24TS-L 15.2(2)E7 C2960X-UNIVERSALK9-M - cisco switch.  Does anyone have any idea what could cause ...

Resolved! DNA: Installation - gateway | static route configuration

I've been trying to get the initial installation completed for Cisco DNA. I have been finding an inconsistency in documentation official and unofficial.  Currently I'm in the process of running through the Maglev Configuration Wizard and am having is...