Hi,We are trying to get application health to be seen in DNAC. We currently see only usage and throughput, it's missing other parameters to calculate it.Considering our employees are mostly using wifi it would make sense to configure netflow on WLC. ...
when trying to download RCA file in DNAC using SCP, it appears that access is denied, is there a default password for accessing DNA center using SCP?Please suggest any configuration changes. I followed the following stepshttps://www.cisco.com/c/en/us...
is it advisable to have Naming Convention DNAC Templatesif so what is the best practice to have Naming Convention DNAC Templates
Hello,I was wondering it there is a way to see how much traffic an application generates on an entire site?I can find it per switch, but was wondering if it can be done globally?Thanks,Ken
About the DNAC report function Is there a way to retrieve the device information in the report function?Example) CSV/JSON formatandCan I get device firmware information?
Has anyone been able to integrate a Meraki Dashboard into DNA 2.x.We continually get a FQDN error for api.meraki.com on validation.Has anyone else experienced this. We're using a dedicated Cloud port via a Proxy. Connecting to all the other Cisco ser...
We have many ISR4451 routers. We've been using DNAC to upgrade code and so far it's been fine. These routers and stand-alone (no SD-WAN) and have the boot var set to the .bin file. Recently, after DNA-C does an upgrade, the router fails to come ba...
Hello Everyone-We are currently designing a topology to support an industrial network. But requesting some direction respectfully. For starters, I do not have any experience when it comes to configuring both Fusion Core and Fabric Border devices. Nor...
We are attempting to integrate DNAC v2.2.3.4 with ISE 3.0.0. During the server integration we're coming up against this error. I'm struggling to find any information around it. Has anyone come across this error during integration, or know where to lo...
Hi all!Trying to update switches OS from DNA UI and receiving this pre-check error:File transfer using HTTPS and SCP failedExpected : Device need to have https/scp reachability to ControllerAction : Verify HTTPS/SCP configurations, DNAC certificates ...
Hi Guys,Operationally, and feature set wise, are there any differenes between a Fabric-Site and Fabric in a Box. My main area of thought is Wireless. Can I still have a centralised WLC that supports a distribted campus? I.E, lots of Fabric-Sites and ...
Hello all,Before to add the command : pnp startup-vlan 660 on my upstream switch, I want to be sure it is without risk.This command is only use by the PNP & DNAC solution ? I ask it because unfortunaly, the VLAN 1 is use on our network. ( I know, it ...
Hello, We have bought 9500 and 9200 switches with their respective DNA, unfortunatly the switches were burned in our warehouse by a fire before we use them. We plan to order other switches for replacement, my question is: is it possible to transfer t...
My PnP agent is not getting DHCP IP address from MS DHCP server , where as it is working from Cisco swtich DHCP server.is there any restrictions on MS DHCP server ?9300 SW---new 9200 sw-as PnP agentany suggestions
Hello all, there seems to be a lot of discussion about if it is possible to connect a non sda capable switch to FE. I have found this post "Solved: Non sda switch connected to the fabric edge - Cisco Community" from which I understand that it is poss...
