Cisco Digital Network Architecture (DNA)

Hi all, I ran the DNA-C upgrade from 1.3.0.147 to 2.1.2.0 (or 1.5.208 as it shows in the GUI when upgrading), but it has failed with the updates status: System update status:Version successfully installed : 1.3.0.147Version currently processed : 1.5....

I am new to DNAC and looking for some advice.  Assurance is reporting many P1 issues where my access switches (non-fabric) "is unreachable from Cisco DNA Center".  These devices are online and running - I can ping them from DNA center and no other mo...

I would like to upgrade DN2-HW-APL, which is currently in trial operation, from version 1.3.3.7 to version 2.1.1.3.The initial set of DN2-HW-APL is over and I was able to get started from version 1.3.3.1 to version 1.3.3.7 on the GUI.However, when I ...

Hi, since version 2.1.2.0 is new I would like to share couple things from my experience upgrading from code 1.3.3.x to code 2.1.2.0. Chances are that this post will save someone some time because this information is not documented in upgrade guide.  ...

Greetings, i am testing the device onboarding with plug and play and ran into some issues. my day-0 template has some variables like management ip, etc.the field is called mgmt_ip.when i add a device via the bulk import and a csv file is it possible ...

Hello everybody.I am using DNA Center version 1.3.1.5 and Cisco WLC 3504 running firmware version 8.10.112.0. This WLC is exist on Provision - Inventory DNA Center. But on the Assurance page, there is no wireless client detected. And also on Assuranc...

I want to retrieve an overview of all fabric sites using DNA-C API. But where I can get an overview of all sites using a get request on https://{controller_ip}/dna/intent/api/v1/site, I can't get an overview of all fabrics using https://{controller_i...

Folks,          I have a tiny site connected using fiber across the street from my datacenter/campus where dnac is installed and working.I know Cisco Best practices says to have a controller at every remote site for fabric enabled wireless. My questi...