cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
143
Views
0
Helpful
3
Replies

Switch IOS Upgrade Via DNAC

Robo123
Beginner
Beginner

Hi All,

We are trying to upgrade the Stack Switch (Cisco 9300) IOS from 16.12.5b to 17.3.5 via DNAC which is getting failed in pre-check.

Robo123_0-1663079084553.png

 

DNAC is running with Version 2.2.2.8 .

Can some one help us to know why the failure is happening and how to resolve the same

 

3 Replies 3

balaji.bandi
VIP Community Legend VIP Community Legend
VIP Community Legend

You see log details next to it, what you see ? is this first stack you trying to upgrade used DNAC ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi Balaji,

Yes this is the first stack i'm trying to upgrade and i cant see any log details next to this.

Only the below is available.

Robo123_0-1663135253977.png

 

Dan Rowe
Cisco Employee
Cisco Employee

You can gain insight into the readiness checks that are performed and see which checks are failing preventing you from proceeding with the SWIM workflow for those devices.

Navigate to the Inventory -> Change the focus to 'Software Images' -> Select 'Needs Update' under the 'Software Images' column.

 

Screen Shot 2022-09-14 at 2.38.18 PM.png

Screen Shot 2022-09-14 at 2.39.16 PM.png

Cisco DNA Center SWIM deployment guide:

-- https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/dnac-swim-deployment-guide.html

 

HTH

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: