Hi all we are testing a wireless sensor with DNAC.All test go well, but we stil have reported failures under association.If I drill down, the failure reason is "Deauthenticated because Sensor is leaving" (see screenshot)Isn't this normal behavior?
Forum Posts
Working to automate the build of a C3560CX and managed to get things working to the point where a golden image was pushed to the unit and a base config pushed out from template. All good. Then proceeded to delete the device from DNAC, run a 'pnpa sy...
You can restore the lost configuration files from the restore option of the linksyssmartwifi.com main configuration page. To start the restoration process, you need to click the “Choose File” option and have to navigate your cursor to the location wh...
If you are unable to reach the tplinkrepeater.net interface, there are various troubleshooting steps that you can take to resolve the issue. If you receive an error message from Tp-link, it may be the case that you cached the IP address of a range ex...
Resolved! C9800 not initializing PnP
I have option 43 configured on a Meraki Z3 router with a single VLAN 1 on it. It has reachability to the DNAC. I have cleared all crypto, nvram, and vlan data from the WLC and I still can't get the PnP process to start on the C9800-L-C. I followed th...
I have DNAC 2.2.3.x and WLC added into its inventory running on 17.3.3.My question is related to compliance check (especially to run vs startup config).According tohttps://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-...
Resolved! AURA check guidance
Hi, I have a DNAC version 1.3.x.x where the AURA report is giving a warning #32.How do I define a cluster hostname? As far as I remember the cluster was configured with a hostname during installation. #32:Checking:Cluster hostname is definedWarning:C...
Hi folks, I'm running into an obstacle.What i want to do is use the rest api to assign authentication template to a switchport. If i use a GET request, i get this info about the port:GET: https://cisco-dnacenter.myoffice.com/dna/intent/api/v1/busines...
Hello, i'm not very sure of the current license status on Cisco 9500 switch and if that can affect anything on the functionality.I see the field in show license status:Next ACK deadline: Aug 22 08:11:36 2021 DST And Cisco says (If an ACK is required ...
# Cisco DNA Center API Call ScriptCisco DNA CENTER SANDBOX Call DNA Center API Call Python Script Example# Demo using Cisco DNA Center Sandbox "host": "sandboxdnac.cisco.com", "port": 443, "username": "devnetuser", "password": "Cisco123!"# Sample scr...
Hi All,I have updated software successfully on DNAC and wanted to update all applications but failed as visible in below screenshot. Update almost longed for one day and at the end it failed.I clicked Update all, but still some of application hangs i...
Hello I recently started using the smart licensing for the switches for our customer. Now every switch has internet access to tools1.cisco.com and tools2.cisco.com. However someone told me that it's possible to make the call-home through DNAcenter.I ...
Hi, We have provisoned a new RF profile on DNAC, the provisioning and deployment seems to be successful on the DNAC, however on the WLC we can't see the newly created/provisioned profile, any idea why is this issue occuring? DNAC version is 2.2.2.3WL...
Resolved! DNA - Topic about encryption
Hello team, After scanning vulnerabilities at the Cisco DNA Center, it was found that: - Replace the 'Diffie-Hellman' with a safer group;"The remote server is affected by a cryptographical weakness.Disable weak cipher suites in the server's configura...
Hi Team ,I am very much confused about BGP table ...I m still not sure it's BGP rib table or BGP routing table ..I came in this situation while performing LAB in eveng. My set up was mpls ( ldp ) core and PE _CE was running EBGP . CE1______PE1____...
