06-06-2022 12:43 AM
Hey guys I was wondering if C1000 switches can become part of SD Access fabric or not?
Solved! Go to Solution.
06-06-2022 03:08 AM
Alrigth, sorry.
The best way to check that is looking at this link. You can choose a DNAC version of your preference.
https://www.cisco.com/c/dam/en/us/td/docs/Website/enterprise/dnac_compatibility_matrix/index.html
For 2.2.3.5 , for example, this switch does not show as supported.
Another place to look at is on the switch Data sheet. You can see that there´s no DNAC Essential or Advanced licensing available. Which take me to the conclusion that this switch does not support fabric.
06-06-2022 02:22 AM
Hi
C1000 are routers actually and they can participate in the fabric SDWAN topology as cEdges. But, they does not support Enterprise fabric with DNAC.
06-06-2022 02:48 AM
Hi,
I was talking about this switch, https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-1000-series-switches/nb-06-cat1k-ser-switch-ds-cte-en.html
06-06-2022 03:08 AM
Alrigth, sorry.
The best way to check that is looking at this link. You can choose a DNAC version of your preference.
https://www.cisco.com/c/dam/en/us/td/docs/Website/enterprise/dnac_compatibility_matrix/index.html
For 2.2.3.5 , for example, this switch does not show as supported.
Another place to look at is on the switch Data sheet. You can see that there´s no DNAC Essential or Advanced licensing available. Which take me to the conclusion that this switch does not support fabric.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: