cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
692
Views
0
Helpful
1
Replies
samirsaad
Beginner

C9500-32QCA reload power problem

dears ,

   have a nice day

 

     kindly i have problem that switch C9500-32QC that is working as border in SDA  is reloaded  without any reason or loggs , so kindly share your experience if you faced a similar problem

  all switches on the same rack are working fine

------------------------------------------------

Border-SW uptime is 1 hour, 28 minutes
Uptime for this control processor is 1 hour, 29 minutes
System returned to ROM by PowerOn
System image file is "bootflash:cat9k_iosxe.16.12.03s.SPA.bin"
Last reload reason: PowerOn

 

--------------------------------------

KSU-SH-Border1-SW#show power
Power Fan States
Supply Model No Type Capacity Status 0 1
------ -------------------- ---- -------- --------- -----------
PS0 C9K-PWR-650WAC-R AC 650 W ok good N/A
PS1 C9K-PWR-650WAC-R AC 650 W ok good N/A

Fan Fan States
Tray Status 0 1 2 3
------ ---------- -----------------------
FM0 ok good good good good
FM1 ok good good good good

KSU-SH-Border1-SW#

1 REPLY 1
andresfr
Cisco Employee

Hi Samir.

 

Are you seeing any *.tar.gz file in the crashinfo directory? Is this a standalone switch?

 

Try running the following and share the output:

 

dir crashinfo:*.tar.gz

show logging onboard switch active uptime detail

 

Best regards.