Cisco AP1800S IP SLA Tests fail: Error response(400/500) from DNAC
I am testing a couple of wireless sensors (1800S) with Cisco DNAC and noticed that IP SLA tests always fail no matter what. There's not much configuration for IP SLA tests apart from what looks like a wireless QoS category (Platinum, Gold, Silver, Bronze).
I have checked Assurance logs and it shows the following Error message: Error response(400/500) from DNAC
However, there's no information provided to troubleshoot this issue further.
I wonder why is that and what can we do to troubleshoot? Cisco DNAC is v18.104.22.168 and sensors are running 22.214.171.124
Does this smell like a Cisco TAC case, or is it something we can fix ourselves?
I am not 100%, but I think I may have found the answer :)
Note: The network infrastructure must be running software release 8.8.111 or later to perform these tests.
For IP SLA, the sensor connected to the AP which has the IP SLA responder feature. IP-SLA Responder feature is available on Wave 2 APs-AP1800, AP2800, AP3800 and AP4800 seriesand 802.11ax APs –Catalyst 9100 series AP with AireOS 8.8 or above or IOS-XE 16.12.1s or above software.
Difference between USGMII and USXGMII:
USGMII is used for 8x10M/100M/1GE network ports, with each port maximum speed of 1GE. USXGMII-Single Port version can be used to support ONE network port with 10M/100M/1G/2.5G/5G/10G data rates
USGMII is used...
Hi, how to execute linux-commands (which are executeable directly in the guestshell) from IOS-XE sample :[guestshell@guestshell ~]$ cat test.txt | grep SmartSmart Licensing Status: Smart Licensing is DISABLED[guestshell@guestshell ~]$ exit ...
Hi Everybody! I am trying to get the configuration from a nexus 9000v virtualized in my home lab, I am always getting this error. Exception has occurred: RPCError
File "C:\4_4 Modernizing_Netwo...