cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!

  • Register for the monthly Cisco DNA Center Ask the Expert Sessions to learn about Cisco DNA Center configuration and deployment.
  • 648
    Views
    5
    Helpful
    4
    Replies
    Highlighted
    Beginner

    Cisco DNA Pixie Boot

    We recently added a switch in Cisco DNA fabric. After the change Pixie Boot stops working. Does anyone know how to resolve this problem?

    Everyone's tags (1)
    4 REPLIES 4
    Highlighted
    Collaborator
    Collaborator

    Re: Cisco DNA Pixie Boot

    Hi 

    Can you please explain a bit more?

    Highlighted
    Cisco Employee

    Re: Cisco DNA Pixie Boot

    Hi

     

    which pxe server is used? Are you using windows sccm? 

     

    Thanks

    Highlighted

    Re: Cisco DNA Pixie Boot

    Could L2 Flooding (or L2 Extension) be a solution for this problem?
    Highlighted
    Cisco Employee

    Re: Cisco DNA Pixie Boot

    You will need to go into the LSI MegaRaid Controller Bios (Ctrl + H) and select the virtual drives option on the left. When the Virtual Drives window opens, you must select the drive (the Raid Volume) that you want as your primary boot disk and below there will be an option to set as your boot device. Apply it and save.

    Content for Community-Ad